{"id":9967,"date":"2019-10-10T08:00:58","date_gmt":"2019-10-10T14:00:58","guid":{"rendered":"https:\/\/www.ulprospector.com\/knowledge\/?p=9967"},"modified":"2019-11-03T17:58:35","modified_gmt":"2019-11-03T23:58:35","slug":"pe-microinjection-moulding-moves-into-the-mainstream","status":"publish","type":"post","link":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/","title":{"rendered":"Micro-injection Moulding Moves into the Mainstream"},"content":{"rendered":"
\"A
A micro-injection unit installed on a Sumitomo<\/figcaption><\/figure>\n

Micro-injection moulding (micro-IM) – moulding plastic parts that have a shot weight of less than 1g – has been around for over two decades. Andy Pye traces the development of the process to the present day.<\/p>\n

Initially, in the 1980s, this technology utilized traditional injection moulding, but no dedicated machines were available until the mid-1990s. For very small shot weights, machines used to use plunger systems \u2013 similar to a syringe. These were used on specialist machines designed to produce components for specific markets. However, some of these specialist machines could cost up to \u00a3200,000, making entry into this market unviable for many moulders. In 2001, there were concerns about the higher pressures required for micro-IM (up to 40,000psi, compared with 20,000psi for traditional moulding) as well as handling, inspecting and packaging miniature components. At that time, it was also recommended that this moulding process should not be carried out on machines larger than 20 tonnes, because it was difficult to control and stabilise such small shot sizes, potentially leading to part damage and a lack of repeatability in the production process.<\/p>\n

Design features<\/h3>\n

Now, the limit of what can now be moulded has reduced to parts as light as 0.0003g, with walls as thin as 0.0004in and dimensional tolerances to +\/-0.0005in. At the IKV-Institute of Plastics Processing at RWTH Aachen University, thermoset micro parts with a shot weight in the area of 0.05 to 3.0g can be manufactured, which are advantageous in bio-medical applications.<\/p>\n

Unlike conventional injection moulding, where manufacturability issues are considered in the product design phase, relatively little has been done for micro injection moulding, where the research community is still assessing the process capabilities. Open questions include how small components can be, and what is can the maximum achievable aspect ratio.<\/p>\n

High aspect ratio components constrain its application. It is also quite difficult to design the cooling system because of the dimension of the mould, where the cavity and the ejection are only a few centimetres apart. This means that a temperature variation across the moulded part should be expected. One of the main goals related to the design of a micro mouldable component is the reduction of the shrinkage affecting shape stability in the form of induced warpage. Warpage occurs, due to the non-uniformity of the shrinkage induced by complex thermal variation inside the mould and its prediction is important for parts with relatively large area compared to their thickness.<\/p>\n

The use of inserts becomes very important in micro injection moulding when, for example, micro cavities for microfluidic applications are realized and then fitted in the main mould body.<\/p>\n

Another special feature is the system to measure the mould cavity pressure. Different methods are proposed to measure the cavity pressure, including a piezoelectric force transducer located behind the injection pin or a miniaturised quartz sensor to measure pressure directly.<\/p>\n

\"Robots-are-often-used-in-to-insert-pins-into-electrical-switches-and-connectors-and-remove-parts-from-moulds-Learn
Robots are often used in to insert pins into electrical switches and connectors and remove parts from moulds<\/figcaption><\/figure>\n

Available machines<\/h3>\n

Currently, commercial micro moulding systems are produced by Ferromatik Milacron, Arburg and Sumitomo Demag as micro-injection units for conventional machines and Wittmann-Battenfeld, Babyplast and Desma as dedicated micro injection moulding machines.<\/p>\n

The latest all-electric moulding machines have vastly increased precision, thanks to advanced direct drive technology. Very high levels of repeatability can be achieved while a specific 14mm screw design improves the dosing, which is critical in micro-IM and makes working with shot weights of between 0.1g to 1g more cost-effective.<\/p>\n

According to Nigel Flowers, Managing Director of Sumitomo (SHI) Demag UK, using the 14mm screw, traditional 50- and 75-tonne IntElect electric machines from Sumitomo (SHI) Demag can be deployed. He says that the screw design is the smallest screw capable of processing standard plastic resins. Importantly, the 14mm screw enables users to limit the amount of material used by adapting nozzle body length and diameter to minimise residual time of material in the barrel. The 14mm plasticising unit contains around 8cm3 of plastic material at the screw. Traditionally, they would be used to run all sorts of different components with shot weights that were much larger than 1g, but the 14mm screw allows small shot weights and the fine control needed.<\/p>\n

Market prospects<\/h3>\n

In 2012, the global polymer and thermoplastic micro moulding market – covering medical, automotive, electronics and telecommunications – was valued at just over US$300 million and industry commentators predict that the value of micro-IM will reach nearly US$900 million by 2020.<\/p>\n

Nanotechnology is gaining rapid traction across a range of industries, including computing. In the future it won\u2019t be just the size of components that matter, but the degree of engineering involved. Likewise, design advances in automotive, driven in part by rapid developments in microfluidics technology, are expected to boost demand significantly.<\/p>\n

Despite more automation and smaller components, the process of micro-IM isn\u2019t that dissimilar to creating larger parts. Shot-to-shot precision is where the main difference lies. Historically, micro-IMs would have used hydraulic machines, which meant dealing with variations in oil temperature and compressibility. Those drawbacks are removed from the equation with all-electric units.<\/p>\n

After packaging and construction, electronics is the third biggest user of plastic components. The demand in electronics is driven by on-going innovation and advancements in nanotechnology, specifically sensors and circuits. As electrical, communication and information devices shrink and get lighter, so too does the size of the components contained inside. Moulding these parts, many of which are plastic and can house and connect the smallest processing chips, requires tremendous precision and durability. A major challenge is to offset the larger battery sizes that maintain power and make all other electrical components smaller.<\/p>\n

In the automotive industry, increasingly complex vehicle electronics uses micro-injection moulding to manufacture connectors, gears and micro switches, as well as sensors. Germany holds a large amount of the European market for micro-injection moulding on account of the country\u2019s lead position in automobile manufacturing.<\/p>\n

In the global fibre optics market, micro-injection moulding is adopted for moulding gears such as micro connectors, ceramic holders and optics housing, as well as micro engines, micro drive control systems, and micromechanics rotators.<\/p>\n

Parts handling<\/h3>\n

As well as offering repeatability and a stable production process, Micro-IM also requires a certain level of automation to ensure that the moulded items stay in optimal condition with regards part quality, hygiene – ensuring electrical components aren\u2019t exposed to dust or particles and production efficiency. Cleanrooms might be used for if components are being supplied to the pharmaceutical, aerospace, military or biotech industries, but in the electronics sector this is less critical; unless the part is being surface treated or used as a decorative layer. Vacuums are often used to extract parts, to avoid contamination. Many machines have complex end-of-arm tooling systems to ensure parts are removed without damage.<\/p>\n

References<\/h3>\n
    \n
  1. The Micro Injection Moulding Process for Polymeric Components Manufacturing; <\/a>R. Surace, G. Trotta, V. Bellantone and I. Fassi; ITIA-CNR, Institute of Industrial Technology and Automation, National Research Council, Italy<\/li>\n
  2. Less is more: Sizing up micro-electronic moulding trends; Nigel Flowers, Managing Director, Sumitomo (SHI) Demag UK<\/li>\n<\/ol>\n","protected":false},"excerpt":{"rendered":"

    Micro-injection moulding (micro-IM) – moulding plastic parts that have a shot weight of less than 1g – has been around for over two decades. Andy Pye traces the development of the process to the present day. Initially, in the 1980s, … Continued<\/a><\/p>\n","protected":false},"author":22,"featured_media":9979,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"episode_type":"","audio_file":"","podmotor_file_id":"","podmotor_episode_id":"","cover_image":"","cover_image_id":"","duration":"","filesize":"","filesize_raw":"","date_recorded":"","explicit":"","block":"","itunes_episode_number":"","itunes_title":"","itunes_season_number":"","itunes_episode_type":"","footnotes":""},"categories":[21],"tags":[353,354],"ppma_author":[1238],"class_list":["post-9967","post","type-post","status-publish","format-standard","has-post-thumbnail","category-plastics-2","tag-injection-moulding","tag-micro-injection-moulding","entry"],"yoast_head":"\nMicro-injection Moulding Moves into the Mainstream<\/title>\n<meta name=\"description\" content=\"After two decades of micro-injection moulding, Andy Pye investigates the development of the process from inception to the present day.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Micro-injection Moulding Moves into the Mainstream\" \/>\n<meta property=\"og:description\" content=\"After two decades of micro-injection moulding, Andy Pye investigates the development of the process from inception to the present day. Read more:\" \/>\n<meta property=\"og:url\" content=\"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/\" \/>\n<meta property=\"og:site_name\" content=\"Prospector Knowledge Center\" \/>\n<meta property=\"article:published_time\" content=\"2019-10-10T14:00:58+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2019-11-03T23:58:35+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/ulprospector.ul.com\/wp-content\/uploads\/2019\/10\/Webp.net-resizeimage-23.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"630\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Andy Pye\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:description\" content=\"After two decades of micro-injection moulding, Andy Pye investigates the development of the process from inception to the present day. Read more:\" \/>\n<meta name=\"twitter:image\" content=\"https:\/\/ulprospector.ul.com\/wp-content\/uploads\/2019\/10\/Image-3_-A-micro-injection-unit-installed-on-a-Sumitomo-SHI-Demag-250kN-machine-150x150.jpg\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Andy Pye\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"6 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/\"},\"author\":{\"name\":\"Andy Pye\",\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/#\\\/schema\\\/person\\\/441082c0781d296fc60a593727eae674\"},\"headline\":\"Micro-injection Moulding Moves into the Mainstream\",\"datePublished\":\"2019-10-10T14:00:58+00:00\",\"dateModified\":\"2019-11-03T23:58:35+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/\"},\"wordCount\":1196,\"commentCount\":2,\"image\":{\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/ulprospector.ul.com\\\/wp-content\\\/uploads\\\/2019\\\/10\\\/Image-3_-A-micro-injection-unit-installed-on-a-Sumitomo-SHI-Demag-250kN-machine-600x400.jpg\",\"keywords\":[\"injection moulding\",\"micro-injection moulding\"],\"articleSection\":[\"Plastics\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/\",\"url\":\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/\",\"name\":\"Micro-injection Moulding Moves into the Mainstream\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/ulprospector.ul.com\\\/wp-content\\\/uploads\\\/2019\\\/10\\\/Image-3_-A-micro-injection-unit-installed-on-a-Sumitomo-SHI-Demag-250kN-machine-600x400.jpg\",\"datePublished\":\"2019-10-10T14:00:58+00:00\",\"dateModified\":\"2019-11-03T23:58:35+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/#\\\/schema\\\/person\\\/441082c0781d296fc60a593727eae674\"},\"description\":\"After two decades of micro-injection moulding, Andy Pye investigates the development of the process from inception to the present day.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/#primaryimage\",\"url\":\"https:\\\/\\\/ulprospector.ul.com\\\/wp-content\\\/uploads\\\/2019\\\/10\\\/Image-3_-A-micro-injection-unit-installed-on-a-Sumitomo-SHI-Demag-250kN-machine-600x400.jpg\",\"contentUrl\":\"https:\\\/\\\/ulprospector.ul.com\\\/wp-content\\\/uploads\\\/2019\\\/10\\\/Image-3_-A-micro-injection-unit-installed-on-a-Sumitomo-SHI-Demag-250kN-machine-600x400.jpg\",\"width\":600,\"height\":400,\"caption\":\"A micro-injection unit installed on a Sumitomo - Learn more about injection moulding here\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/9967\\\/pe-microinjection-moulding-moves-into-the-mainstream\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/ulprospector.ul.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Micro-injection Moulding Moves into the Mainstream\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/#website\",\"url\":\"https:\\\/\\\/ulprospector.ul.com\\\/\",\"name\":\"Prospector Knowledge Center\",\"description\":\"Welcome to the blog for UL Prospector, the most comprehensive raw material search engine for product developers.\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/ulprospector.ul.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/#\\\/schema\\\/person\\\/441082c0781d296fc60a593727eae674\",\"name\":\"Andy Pye\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/ulprospector.ul.com\\\/media\\\/2017\\\/10\\\/Andy-Pye_avatar_1508792576-96x96.jpg3e58e840009b2ffbaebd613d67175564\",\"url\":\"https:\\\/\\\/ulprospector.ul.com\\\/media\\\/2017\\\/10\\\/Andy-Pye_avatar_1508792576-96x96.jpg\",\"contentUrl\":\"https:\\\/\\\/ulprospector.ul.com\\\/media\\\/2017\\\/10\\\/Andy-Pye_avatar_1508792576-96x96.jpg\",\"caption\":\"Andy Pye\"},\"description\":\"Andy Pye is a technologist, technical writer, journalist and editor based in London, England close to the Greenwich Meridian line. Having originally qualified as a metallurgist at Cambridge University, Andy spent a period as a consultant, where he specialised in advanced composites, asbestos substitutes and the methodology of materials selection, subjects on which he has published several books and technical papers. Since the early 1980s, he has edited many of the leading manufacturing and engineering titles in the UK, firstly cutting his teeth as a technical journalist on Design Engineering. Known as \\\"The Materials Man\\\", he covered many of the early innovations in engineering plastics. He was promoted to editor in 1985 and subsequently moved on to edit Engineering magazine (1992), and Industrial Technology (1994). In 1999, with former colleagues, he launched Pro-Talk, which founded the first online publications for engineers in Europe - the then thriving business was sold to Centaur Publications in 2006. Since then, Andy has continued to publish online, including his own title New Materials International (www.newmaterials.com). He is also a regular contributor to many specialist engineering titles in the UK and Europe, including Controls, Drives & Automation (CDA), Engineering & Technology (E&T), and Environmental Technology. As technology companies strive to manage their own websites, they are recognising the need to develop their writing and editing resources. Andy now works directly for companies in the manufacturing sector, delivering technical content through this medium for their current and prospective customers. Working with end users, PR agencies and website designers, this business is growing rapidly and Andy is aactively building a team of expert writers to fufil the demand for feature articles, news items and white papers.\",\"sameAs\":[\"http:\\\/\\\/www.ulprospector.com\"],\"url\":\"https:\\\/\\\/ulprospector.ul.com\\\/author\\\/andy-pye\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Micro-injection Moulding Moves into the Mainstream","description":"After two decades of micro-injection moulding, Andy Pye investigates the development of the process from inception to the present day.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/","og_locale":"en_US","og_type":"article","og_title":"Micro-injection Moulding Moves into the Mainstream","og_description":"After two decades of micro-injection moulding, Andy Pye investigates the development of the process from inception to the present day. Read more:","og_url":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/","og_site_name":"Prospector Knowledge Center","article_published_time":"2019-10-10T14:00:58+00:00","article_modified_time":"2019-11-03T23:58:35+00:00","og_image":[{"width":1200,"height":630,"url":"https:\/\/ulprospector.ul.com\/wp-content\/uploads\/2019\/10\/Webp.net-resizeimage-23.jpg","type":"image\/jpeg"}],"author":"Andy Pye","twitter_card":"summary_large_image","twitter_description":"After two decades of micro-injection moulding, Andy Pye investigates the development of the process from inception to the present day. Read more:","twitter_image":"https:\/\/ulprospector.ul.com\/wp-content\/uploads\/2019\/10\/Image-3_-A-micro-injection-unit-installed-on-a-Sumitomo-SHI-Demag-250kN-machine-150x150.jpg","twitter_misc":{"Written by":"Andy Pye","Est. reading time":"6 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/#article","isPartOf":{"@id":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/"},"author":{"name":"Andy Pye","@id":"https:\/\/ulprospector.ul.com\/#\/schema\/person\/441082c0781d296fc60a593727eae674"},"headline":"Micro-injection Moulding Moves into the Mainstream","datePublished":"2019-10-10T14:00:58+00:00","dateModified":"2019-11-03T23:58:35+00:00","mainEntityOfPage":{"@id":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/"},"wordCount":1196,"commentCount":2,"image":{"@id":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/#primaryimage"},"thumbnailUrl":"https:\/\/ulprospector.ul.com\/wp-content\/uploads\/2019\/10\/Image-3_-A-micro-injection-unit-installed-on-a-Sumitomo-SHI-Demag-250kN-machine-600x400.jpg","keywords":["injection moulding","micro-injection moulding"],"articleSection":["Plastics"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/","url":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/","name":"Micro-injection Moulding Moves into the Mainstream","isPartOf":{"@id":"https:\/\/ulprospector.ul.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/#primaryimage"},"image":{"@id":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/#primaryimage"},"thumbnailUrl":"https:\/\/ulprospector.ul.com\/wp-content\/uploads\/2019\/10\/Image-3_-A-micro-injection-unit-installed-on-a-Sumitomo-SHI-Demag-250kN-machine-600x400.jpg","datePublished":"2019-10-10T14:00:58+00:00","dateModified":"2019-11-03T23:58:35+00:00","author":{"@id":"https:\/\/ulprospector.ul.com\/#\/schema\/person\/441082c0781d296fc60a593727eae674"},"description":"After two decades of micro-injection moulding, Andy Pye investigates the development of the process from inception to the present day.","breadcrumb":{"@id":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/#primaryimage","url":"https:\/\/ulprospector.ul.com\/wp-content\/uploads\/2019\/10\/Image-3_-A-micro-injection-unit-installed-on-a-Sumitomo-SHI-Demag-250kN-machine-600x400.jpg","contentUrl":"https:\/\/ulprospector.ul.com\/wp-content\/uploads\/2019\/10\/Image-3_-A-micro-injection-unit-installed-on-a-Sumitomo-SHI-Demag-250kN-machine-600x400.jpg","width":600,"height":400,"caption":"A micro-injection unit installed on a Sumitomo - Learn more about injection moulding here"},{"@type":"BreadcrumbList","@id":"https:\/\/ulprospector.ul.com\/9967\/pe-microinjection-moulding-moves-into-the-mainstream\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/ulprospector.ul.com\/"},{"@type":"ListItem","position":2,"name":"Micro-injection Moulding Moves into the Mainstream"}]},{"@type":"WebSite","@id":"https:\/\/ulprospector.ul.com\/#website","url":"https:\/\/ulprospector.ul.com\/","name":"Prospector Knowledge Center","description":"Welcome to the blog for UL Prospector, the most comprehensive raw material search engine for product developers.","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/ulprospector.ul.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/ulprospector.ul.com\/#\/schema\/person\/441082c0781d296fc60a593727eae674","name":"Andy Pye","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/ulprospector.ul.com\/media\/2017\/10\/Andy-Pye_avatar_1508792576-96x96.jpg3e58e840009b2ffbaebd613d67175564","url":"https:\/\/ulprospector.ul.com\/media\/2017\/10\/Andy-Pye_avatar_1508792576-96x96.jpg","contentUrl":"https:\/\/ulprospector.ul.com\/media\/2017\/10\/Andy-Pye_avatar_1508792576-96x96.jpg","caption":"Andy Pye"},"description":"Andy Pye is a technologist, technical writer, journalist and editor based in London, England close to the Greenwich Meridian line. Having originally qualified as a metallurgist at Cambridge University, Andy spent a period as a consultant, where he specialised in advanced composites, asbestos substitutes and the methodology of materials selection, subjects on which he has published several books and technical papers. Since the early 1980s, he has edited many of the leading manufacturing and engineering titles in the UK, firstly cutting his teeth as a technical journalist on Design Engineering. Known as \"The Materials Man\", he covered many of the early innovations in engineering plastics. He was promoted to editor in 1985 and subsequently moved on to edit Engineering magazine (1992), and Industrial Technology (1994). In 1999, with former colleagues, he launched Pro-Talk, which founded the first online publications for engineers in Europe - the then thriving business was sold to Centaur Publications in 2006. Since then, Andy has continued to publish online, including his own title New Materials International (www.newmaterials.com). He is also a regular contributor to many specialist engineering titles in the UK and Europe, including Controls, Drives & Automation (CDA), Engineering & Technology (E&T), and Environmental Technology. As technology companies strive to manage their own websites, they are recognising the need to develop their writing and editing resources. Andy now works directly for companies in the manufacturing sector, delivering technical content through this medium for their current and prospective customers. Working with end users, PR agencies and website designers, this business is growing rapidly and Andy is aactively building a team of expert writers to fufil the demand for feature articles, news items and white papers.","sameAs":["http:\/\/www.ulprospector.com"],"url":"https:\/\/ulprospector.ul.com\/author\/andy-pye\/"}]}},"authors":[{"term_id":1238,"user_id":22,"is_guest":0,"slug":"andy-pye","display_name":"Andy Pye","avatar_url":"https:\/\/ulprospector.ul.com\/media\/2017\/10\/Andy-Pye_avatar_1508792576-96x96.jpg","author_category":"1","exclude_author":"","first_name":"Andy","last_name":"Pye","user_url":"http:\/\/www.ulprospector.com","job_title":"","description":"Andy Pye is a technologist, technical writer, journalist and editor based in London, England close to the Greenwich Meridian line. Having originally qualified as a metallurgist at Cambridge University, Andy spent a period as a consultant, where he specialised in advanced composites, asbestos substitutes and the methodology of materials selection, subjects on which he has published several books and technical papers.\r\n\r\nSince the early 1980s, he has edited many of the leading manufacturing and engineering titles in the UK, firstly cutting his teeth as a technical journalist on Design Engineering. Known as \"The Materials Man\", he covered many of the early innovations in engineering plastics. He was promoted to editor in 1985 and subsequently moved on to edit Engineering magazine (1992), and Industrial Technology (1994).\r\n\r\nIn 1999, with former colleagues, he launched Pro-Talk, which founded the first online publications for engineers in Europe - the then thriving business was sold to Centaur Publications in 2006. Since then, Andy has continued to publish online, including his own title New Materials International (www.newmaterials.com). He is also a regular contributor to many specialist engineering titles in the UK and Europe, including Controls, Drives & Automation (CDA), Engineering & Technology (E&T), and Environmental Technology.\r\n\r\nAs technology companies strive to manage their own websites, they are recognising the need to develop their writing and editing resources. Andy now works directly for companies in the manufacturing sector, delivering technical content through this medium for their current and prospective customers. Working with end users, PR agencies and website designers, this business is growing rapidly and Andy is aactively building a team of expert writers to fufil the demand for feature articles, news items and white papers."}],"_links":{"self":[{"href":"https:\/\/ulprospector.ul.com\/wp-json\/wp\/v2\/posts\/9967","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ulprospector.ul.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ulprospector.ul.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ulprospector.ul.com\/wp-json\/wp\/v2\/users\/22"}],"replies":[{"embeddable":true,"href":"https:\/\/ulprospector.ul.com\/wp-json\/wp\/v2\/comments?post=9967"}],"version-history":[{"count":0,"href":"https:\/\/ulprospector.ul.com\/wp-json\/wp\/v2\/posts\/9967\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ulprospector.ul.com\/wp-json\/wp\/v2\/media\/9979"}],"wp:attachment":[{"href":"https:\/\/ulprospector.ul.com\/wp-json\/wp\/v2\/media?parent=9967"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ulprospector.ul.com\/wp-json\/wp\/v2\/categories?post=9967"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ulprospector.ul.com\/wp-json\/wp\/v2\/tags?post=9967"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/ulprospector.ul.com\/wp-json\/wp\/v2\/ppma_author?post=9967"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}