Presented by DOMO Engineering Plastics
Recorded on September 28th, 2021
Polyamide engineered materials are essential solutions in today’s e-mobility industry.
In this presentation, Tristan Jobert and Tobias Epple, both New Business Development Managers Automotive at DOMO, introduce TECHNYL®’s latest innovations for this specific market segment.
Starting from the leading TECHNYL PA6 and PA66 grades for cooling circuits and immersion cooling ranges for electric vehicles (EV), we will then explore the added value of our sustainable TECHNYL® 4EARTH® solutions with glycol resistance. We will also take a close look at the TECHNYL® fire resistant product family for powertrain electrification systems, available in the colour orange, which are the materials of choice for high voltage and cabling applications in EVs. All these grades are UL941 V0 certified, featuring excellent colour stability, low mould deposit and a comparative tracking index (CTI) of 600 volts or greater. Another key solution family especially for EVs is TECHNYL®’s high purity compounds, designed for highly sensitive electronics and fuel cell system applications to avoid passivation due to contamination and hence ensure part performance over its lifetime.
We will conclude this e-mobility toolkit presentation with TECHNYL®’s special grades for blow moulding. TECHNYL® C550BCR is designed for low-temperature mechanical performance, at -40°C and even lower, especially targeting type 4 hydrogen tank liners and automotive fuel tanks, thanks to its good chemical and impact resistance. This is the ideal compound for hydrogen storage applications as it can handle the extreme temperatures created by the pressure. It also guarantees low permeability, good processing ability and great impact resistance.
Watch the Webinar Recording
Download the Slides
Contact Tristan Jobert / Ask a Question
Contact Tobias Epple / Ask a Question
The views, opinions and technical analyses presented here are those of the author or advertiser, and are not necessarily those of ULProspector.com or UL Solutions. The appearance of this content in the UL Prospector Knowledge Center does not constitute an endorsement by UL Solutions or its affiliates.
All content is subject to copyright and may not be reproduced without prior authorization from UL Solutions or the content author.
The content has been made available for informational and educational purposes only. While the editors of this site may verify the accuracy of its content from time to time, we assume no responsibility for errors made by the author, editorial staff or any other contributor.
UL Solutions does not make any representations or warranties with respect to the accuracy, applicability, fitness or completeness of the content. UL Solutions does not warrant the performance, effectiveness or applicability of sites listed or linked to in any content.
Leave a Reply or Comment